Controllers

CH265

CHEMTROL® CH265 PPM/pH Digital Controller

CHLORINE ANALYSIS MADE SIMPLE CHEMTROL® CH265 PPM/pH Digital Controller introduces the new PPM Sensor for Free Chlorine control. A microprocessor-based digital controller, designed to maintain both free chlorine (PPM) and water pH in Municipal Water, Well Water, Waste water and Industrial applications. No Reagents No Maintenance No Pressure Regulator. Free CL Range 0.00 to 10.0 PPM pH Range 0.0 – 14.0 Programmable 4-20 mA output to PID and/or Chart Recorder Programmable 4-20 mA Output Control with Adjustable Setpoint Dry Contact Remote Alarm STANDARD FEATURES Easy to install Simple to use All Control Functions on Front Panel Separate Adjustable Setpoints Separate Adjustable Alarms Acid/Base Selector Proportional Feed with Adjustable Bandwidth Separate Adjustable Overfeed Safety Timers Rain and Splash Proof Cabinet 5-year Electronics Warranty PRECISE AND RELIABLE PPM READING The new Free Chlorine Sensor is a solid state sensor with a selective membrane that provides direct readings of Free Chlorine in water at concentrations ranging from 0.1 to 10 ppm (parts per million) or mg/l (milligrams per litter). These are true readings of Free Chlorine corresponding to the DPD #1 test. A significant advantage of this PPM sensor is that it’s not affected by cyanuric acid (CYA) stabilizer and/or oxidizers, thereby assuring constant Free Chlorine levels at all times. Unlike other chlorine sensors on the market, this new sensor is easy to install and maintain and gives the operator precise and reliable control of Free Chlorine under the most difficult conditions. The PPM sensor is covered by a full 2-year warranty. CH265 SPECIFICATIONS FREE CHLORINE CONTROL Adjustable from 0.1 to 10.0 ppm (mg/l) or 0.01 to 3.00 (specify) pH CONTROL Adjustable from 0.0 to 14.0 FREE CHLORINE SENSOR Solid state electrode with 3 m cable pH SENSOR Glass electrode with 3 m cable READOUTS PPM (3 digits) and pH (2 digits) LEDs FEED MODES Manual, automatic, proportional ADJUSTMENTS Set-point, calibration, limits, feed rate INDICATORS LEDs for feed mode, feed status, alarms 4-20 mA Output Out-of-range limits CABINET Polystyrene 22 x 18 x 10 cm ELECTRICAL 230V or 24 VAC (specify) PLUMBING Flow Cell Assembly with Y-Strainer WARRANTY 5 years on electronic module 1 year on all other parts SHIPPING 30 x 30 x 30 cm carton, 3 kg without pumps 6 kg with 2 chemical feed pumps

CH265 SPECIFICATIONS

 

FREE CHLORINE CONTROL Adjustable from 0.1 to 10.0 ppm (mg/l) or 0.01 to 3.00 (specify)
pH CONTROL Adjustable from 0.0 to 14.0
FREE CHLORINE SENSOR Solid state electrode with 3 m cable
pH SENSOR Glass electrode with 3 m cable
READOUTS PPM (3 digits) and pH (2 digits) LEDs
FEED MODES Manual, automatic, proportional
ADJUSTMENTS Set-point, calibration, limits, feed rate
INDICATORS LEDs for feed mode, feed status, alarms
4-20 mA Output Out-of-range limits
CABINET Polystyrene 22 x 18 x 10 cm
ELECTRICAL 230V or 24 VAC (specify)
PLUMBING Flow Cell Assembly with Y-Strainer