Brand Name
Electric Heaters
NANO SPLASHER
Electric Heaters
Nano Splasher
Specifically designed for above ground pools and spas, the Nano Splasher, fully titanium, ‘user friendly’ heater has all the benefits of superior performance, 100% efficiency, and most importantly, maximum safety for peace of mind. The Nano Splasher is the perfect solution for heating pools with a flow rate as low as 1m3/h and as high as 17m3/h.
Features & Benefits
- Available as 2-kW & 3-kW “Plug & Play”
- Easy installation, fully equipped and pre-wired with UK or EU plug
- Robust, durable construction
- Ultra-reliable flow switch allows safe operation
- Supplied with temperature thermostat and overheating sensor
- Compact, durable design
- Analogue control with 1.2°C differential
- Titanium flow tube and titanium heating element
- Can be floor or vertically wall mounted
- Vortex, long life, stay clean heating element technology
- 100% efficiency throughout the product life
- Silent operation
- Supplied with water connections for flexible or rigid piping
| Weight | 50 kg |
|---|---|
| Dimensions | 150 × 150 × 150 cm |
| Power Supply | 220-240V single phase |
| Flow Requirements | Minimum flow: 1m³/h Maximum flow: 17m³/h |
| Heating Element | Grade 1 titanium |
| Flow Tube | Grade 1 titanium |
| Control Thermostat | Analogue: 0>45°C (1.2°C differential) |
| Safety Thermal Cut Out | 60°C (manual reset) |
| Flow Switch | Gold tipped reed switch with titanium fulcrum pin |
| Relay | Surface mount DPDT Finder 66.82.8.230.0000 |
| Seals | High temperature special formula EPDM ferrules, TPE end fitting gaskets |
| Water Connections | 1.5″ BSP female thread supplied with 1½” / 50mm stepped ABS unions for rigid pipe and 1½” / 1¼” stepped hose tails for flexible pipe |
| Ingress Protection Rating | IP44 |
| Frequency | 50/60 Hz |
| Working Pressure | 4 bar maximum |
| Mounting | Floor or wall mounting |
© 2025 Dinec All Rights Reserved.